Cover Styl is made of PVC vinyl, acrylic-based adhesive on the back protected by silicone-coated paper, and a printed outer layer. You can view product specifications on our website or contact us for more information.

The Primer is a water-based bonding agent for absorbent porous surfaces, while the Primer+ is solvent-based for laminated and hard (non-absorbent) surfaces. The water-based Primer is applied to the entire surface, whereas the solvent-based Primer is applied only to the perimeter, corners, and any critical areas.

There is a green (GREEN) range of adhesive coatings which is available directly and a red (RED) range with products available within 1-4 weeks.

We offer a standard service (2 to 4 business days) and an express service (1 to 2 business days) depending on the country and city in Europe.

Green items are in stock with a minimum order of 2 meters for certified installers. Red items are available within 1-4 weeks with a minimum order of 10 meters, in multiples of 10 meters. Blue items are a mix of items expected to be discontinued and those for which the manufacturer requires a minimum order.

The complete range is 1.22m wide and the length can vary between 20, 30 or 50ML.

A full roll weighs between 25 and 35kg.

The super finish (Soft Touch) range from the winter collection.

A utility knife, squeegee, and heat gun if you need to stretch the coating. If surface preparation is required before application, we recommend using products specifically designed for that surface.

The total size of the surface to be covered / 1.22m * 20%. Since the dimension of our rolls is 1.22m, you must always add 20% for waste.

Yes indeed, all our adhesive coatings are fire certified.

We purchase this product from several manufacturers all over the world.

No, because they are chemicals and cannot be sent by air.

Ideally, there should be an overlap of 2 to 3cm.

Yes, because we use existing equipment, this avoids overproduction by industrial companies which would otherwise produce more and therefore pollute more.

Yes, we can send you an A5 sample of each of our products. Contact us to order them.

We invite you to visit the following Pinterest account: https://www.pinterest.com/solarscreeninternational/

Self-adhesive vinyl is a covering vinyl that can be applied to walls, furniture, or doors. It's the ideal solution for any interior decorating or renovation project, perfectly recreating various materials (wood, marble, textiles, metallics, glitter, leather, natural stone, solid colors) since most of these adhesive vinyls are textured.

Compared to other renovation methods, adhesive covering is easier and faster to install. It is also more durable and allows you to renovate your furniture rather than throwing it away.

It's a non-invasive solution that generates neither dust nor odor. It's faster, easier to maintain, and more durable. With an adhesive film, the result is more textured and very realistic both visually and to the touch. Also, you won't have to close your establishment during renovations, and while paint would require a refresh after a while, with Cover Styl, its appearance remains unchanged.

Yes, and Cover Styl also has a certification for installing our adhesive coating in marine environments.

Yes, you can install adhesive coating in hospitals; our products are antibacterial and laboratory tested.

Calendered PVC can shrink slightly over the years (2 to 3mm), which is why it is recommended to leave an overlap between the different strips.

No, the adhesive vinyl will not lose its color because it is UV-treated.

To clean adhesive vinyl, simply use a cloth and water. No special product is necessary, but a pH-neutral solution is recommended.

Indeed, you can easily apply one adhesive covering over another. However, this is not recommended for highly textured adhesives such as leather, glitter, etc. It is also recommended not to apply more than three layers on top of each other.

Yes, if you'd like to install our films yourself, you can find installation tutorial videos on our YouTube channel. You can also contact us for advice and to achieve the best results.

It is possible to print on our Cover Styl films with a UV printer.

Yes, most of our adhesive vinyls are moisture-resistant, but depending on the application, you might need silicone sealant around the edges. We obviously advise against our leather, glitter, etc., ranges.

Applying our adhesive coatings to tiles is perfectly possible; it is then up to you to decide whether you want to mark the joint or work the joint beforehand to have a flat surface.

Most Cover Styl products are not only designed for installation on a flat surface, they can stretch up to 15% to fit many surfaces.

Yes, adhesive wall coverings are moisture-resistant. You can install them on shower walls, bathtubs, or bathroom furniture, provided the surface is clean before applying the vinyl. However, we recommend sealing the edges with silicone sealant where they will be in contact with water. Certain types of vinyl are not recommended, such as glitter, leather, etc.

Regarding Cover Styl vinyl wraps, it depends on the surface. They are repositionable if the surface is smooth/laminated. However, the more you reposition the vinyl, the less effective the adhesive will become. Finally, on some surfaces (e.g., painted surfaces), repositioning the film will damage the surface, and the film will no longer adhere properly. Therefore, be careful and seek professional help if necessary.

The ideal installation temperature for adhesive wall coverings is between 15 and 25°C, making them easy to install in a home, hotel, or office. Therefore, avoid placing very hot items, such as a pan, directly on the wall covering.

It depends on the coating. Textured adhesive vinyls, like the Wood range, are more scratch-resistant than smooth vinyls, such as the Solid Color range. Our Soft Touch series, on the other hand, is treated with silicone, making it even more scratch-resistant.

If a bubble appears when applying a decorative film, you can try lifting the film at the point where the bubble is located (if the surface is laminated, tiled, etc.). You can also make a small hole in the bubble and gently heat the area.

It is perfectly possible to remove a Cover Styl film without risk if it is applied to a laminated surface. However, if it is applied to wallpaper, paint, or plasterboard, for example, your original surface will be damaged.

For cutting adhesive film on surfaces where there is a risk of the film lifting, we recommend a 45° cut.

There is an OUTDOOR range designed to withstand the elements; these outdoor vinyl coatings offer a lifespan of up to 20 years.
However, we do not recommend it for floor installations. Furthermore, the warranty is void if adhesive film is applied to the floor (or outdoors if it is not the appropriate product range).

You can absolutely book a telephone appointment (free) or a physical appointment (request a quote) to get personalized advice before starting your installation yourself.